⟁ Kentucky Well Data field records · 2026 survey

Kentucky Well Data › Morgan County › Elkfork (41421)

Elkfork, KY (41421): well depth, water level & drilling cost

✓ 113 KGS/DOW records · Morgan County

145 ftmedian well depth
84 ft–232 fttypical depth range
60 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Elkfork (41421) address — $49

How deep are wells in and around Elkfork (41421), Kentucky?

The median drilled well depth in and around Elkfork (41421) is 145 ft, based on 78 wells with recorded depths in the state KGS/DOW database. Half fall between 84 ft and 232 ft; 90% are shallower than 331 ft.

How much does it cost to drill a well in and around Elkfork (41421)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elkfork (41421)?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–110 ft), from 73 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 19 100–150 ft 21 150–200 ft 5 200–300 ft 19 300–400 ft 9 400–600 ft 2 600+ ft 0
Looking at a specific property in Elkfork (41421)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elkfork (41421)

Free. Goes to licensed drillers working Morgan County.

Part of Morgan County well records.

Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.