⟁ Kentucky Well Data field records · 2026 survey

Kentucky Well Data › Carlisle County › Milburn (42070)

Milburn, KY (42070): well depth, water level & drilling cost

✓ 193 KGS/DOW records · Carlisle County

200 ftmedian well depth
142 ft–258 fttypical depth range
62 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Milburn (42070) address — $49

How deep are wells in and around Milburn (42070), Kentucky?

The median drilled well depth in and around Milburn (42070) is 200 ft, based on 145 wells with recorded depths in the state KGS/DOW database. Half fall between 142 ft and 258 ft; 90% are shallower than 314 ft.

How much does it cost to drill a well in and around Milburn (42070)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milburn (42070)?

The median static water level is 62 ft below ground surface (middle half of wells: 40 ft–100 ft), from 135 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 13 100–150 ft 27 150–200 ft 29 200–300 ft 53 300–400 ft 17 400–600 ft 4 600+ ft 0
Looking at a specific property in Milburn (42070)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milburn (42070)

Free. Goes to licensed drillers working Carlisle County.

Part of Carlisle County well records.

Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.