Kentucky Well Data › Christian County › Hopkinsville (42240)
Hopkinsville, KY (42240): well depth, water level & drilling cost
✓ 81 KGS/DOW records · Christian County
Pull every recorded well near a Hopkinsville (42240) address — $49
How deep are wells in and around Hopkinsville (42240), Kentucky?
The median drilled well depth in and around Hopkinsville (42240) is 130 ft, based on 22 wells with recorded depths in the state KGS/DOW database. Half fall between 78 ft and 220 ft; 90% are shallower than 278 ft.
How much does it cost to drill a well in and around Hopkinsville (42240)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Hopkinsville (42240)?
The median static water level is 45 ft below ground surface (middle half of wells: 32 ft–62 ft), from 15 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Christian County.
Part of Christian County well records.
Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.