Kentucky Well Data › Russell County › Russell Springs (42642)
Russell Springs, KY (42642): well depth, water level & drilling cost
✓ 203 KGS/DOW records · Russell County
Pull every recorded well near a Russell Springs (42642) address — $49
How deep are wells in and around Russell Springs (42642), Kentucky?
The median drilled well depth in and around Russell Springs (42642) is 90 ft, based on 161 wells with recorded depths in the state KGS/DOW database. Half fall between 68 ft and 105 ft; 90% are shallower than 125 ft.
How much does it cost to drill a well in and around Russell Springs (42642)?
Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Russell Springs (42642)?
The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–54 ft), from 140 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Russell County.
Part of Russell County well records.
Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.